HEWLETT PACKARD (HP) LJIII
Instrukcja Serwisowa

HP 33440/HP

33449 COMBINED

SERVICE

MANUAL

INCASE OF DIFFICULTY
If W size is incorrectly reported, repeat steps 1 through 8, checking to be sure the memory board pin connectors are fimly seated. The foUowing error messages may appew
s 53-1

@

ERRORUNITr 53-2 ERRORUNIT o Indimtes an error on a W mansion board. The number following the dash indicates which qansion board failed (1 indica~s the board in the right (front) slot 2 the lefi (rear) slot). E this error appears, now Hewleti-Packad or your authorized alder for assistance. (The user may resume printing by fiting the [-] key.)
57-1

s

ERRORUNITr 57-2 ERRORUNIT: o Indicates that more than four megabfies of =panded memory have been in~ed. The etira memo~, in one megab@ increments, in the indicated slot (1 or 2) will be ignored. but UP to four me~bms toti W be used. TO resume P~nting, . � click the (-] key.
63 SERVICEERRORH this message appears, a board maybe defective or incorrectly in&led.

s

Firm atiempt to clear the error by switching the printer off and then on again. E this does not clear the error, switch the printer OFF and check to be sure the board is seated properly. K this error @l app=s, nom Hewleti-Packard or your authorized deder for assistance.

MEMORYBOARDREMOVAL
To remove a board, first access it by repeating steps 2 through 4 in the �Ind the Boar&� section, Then unseat it (see Figure C-6) by squeezing the green tibs together w~e pfling toward you. Place the board in antistatic pack~rig.

Figure C-6. Removing Board

C-8